Strong 25L Air Compressor – Model STG25L

Strong air compressor model STG25L has a 25 liter air tank and 2 hp engine and due to the use of two wheels in this product, it can be transported easily. This model also uses copper pipes (not just copper cladding) and brass alloy safety valves (not brass cladding) so that the moisture in the air does not damage or rot these parts and increase the useful life of the device.

One of the most prominent features of the STRONG STG25L air compressor is the presence of a piston with a large diameter, thus reducing the filling time of the air inside the tank so that the tank can be filled with compressed air in the shortest possible time. The tank of this model has a thickness of 2.5 mm, which is fully compliant with the CE standard. This increases the safety of the device due to the resistance of moisture inside the compressed air inside the tank. The tank of this compressor also has a moisture discharge screw inside the tank.

When the pressure inside the tank reaches a maximum, the automatic shut-off switch automatically shuts off the engine, and also when the pressure inside the tank reaches a minimum, the device switches on automatically to fill the compressed air inside the tank.

Safety tips for optimal use of the air compressor device

Before turning on the compressor, check the amount of oil in the device from its degree so that it is half full (not more than half).

It is recommended not to use the generator for power supply due to severe fluctuations.

Do not use the compressor in closed and airless environments or environments with a lot of dust as much as possible.

Replace the device filter periodically and drain the water collected in the source by opening the corresponding valve.